Low carbon
Up to 0.1% C at 500mg sample resp. up to 0.5mg C¹⁾

Low carbon
Up to 1.25mg C resp. up to 0.25% C at 500mg sample¹⁾

High carbon
Up to 5% C at 500mg sample resp. up to 25mg C¹⁾
Indicating range up to 100% C²⁾

High carbon
Up to 100mg C resp. up to 20% C at 500mg sample¹⁾
Indicating range up to 100% C²⁾

Low sulfur
0.3% S at 500mg sample resp. up to 1.5mg S¹⁾

Low sulfur
Up to 10mg S resp. up to 2% S at 500mg sample¹⁾

High sulfur
30% S at 150mg sample resp. up to 45mg S¹⁾
Indicating range up to 100% S²⁾

High sulfur
Up to 100mg S resp. up to 20% S at 500mg sample¹⁾
Indicating range up to 100% S²⁾

Carbon
0.1 ppm C at 500mg sample resp. 0.05µg C¹⁾

Carbon
5µg C resp. 10 ppm C at 500mg sample¹⁾

Sulfur
0.1 ppm S at 500mg sample resp. 0,05µg S¹⁾

Sulfur
1µg S resp. 2 ppm S at 500mg sample¹⁾

Low carbon ^1) 3)
±1ppm C³⁾ at 1g sample resp. ±1 µg C or ±0.5% of carbon present

Low carbon ¹⁾
±10µg C³⁾ resp. ±20ppm C at 500mg sample or ±1% of C present

High carbon ¹⁾
±100ppm C³⁾ at 500mg sample resp. ±50µg C or ±0.5% of C present

High carbon ¹⁾
±150µg C resp. ±300ppm C at 500mg sample or ±1% of C present

Low sulfur^1) 3)
±1ppm S at 1g sample resp. ±1µg S or ±0.5% of sulfur present

Low sulfur ¹⁾
±2µg S resp. ±4ppm S at 500mg sample or ±1% sulfur present

High sulfur ¹⁾
±0.1% S at 150mg sample resp. ±150µg S or ±0.5% of sulfur present

High sulfur ¹⁾
±1mg S resp. ±0.2% S at 500mg sample or ±1% sulfur present

Normal sample weight
0.5g to 1g for steel and cast iron

Normal sample weigth
400mg for coal

Normal analysis time
40 to 50 seconds

Normal analysis time
60 to 120 seconds

Induction furnace
19.5 MHz 2.2 kVA max with automatic furnace dust cleaning

Furnace temperature
Up to 1550 C adjustable with ° ± 1°C

Detection method
Solid state infrared absorption for carbon and sulfur

Chemicals
CO₂ trap - sodium hydroxide / H₂O - trap magnesium perchlorate / Catalyst - copper oxide

Gas required
Oxygen 99.5% pure, 2 to 4 bar (30 to 60 psi), 3 l/min and compressed air 4 to 6 bar (60 to 90 psi)

Interfaces
Computer - serial ⁶⁾

Power requirements
Analyzer⁵⁾ : 230 V AC ±10% 50/60 Hz max 15 Amps 3450 Watts
Resistance furnace : 230 V/AC ±10% 50/60 Hz. Maximum heat up current 20A

Dimensions                       Width             Height             Depth   
Analyzer⁵⁾:                   55 cm (21")  80 cm (31.5")  60 cm (23.5")
   Resistance furnace:       33 cm (13")  52 cm (20.5")  60 cm (23.5")⁴⁾
    TIC-Module:                  33 cm (13")  52 cm (20.5")  60 cm (23.5")   

Weights
      Analyzer⁵⁾      Resistance furnace    TIC-Module
    approx. 110 kg     approx. 36 kg         approx. 28 kg

Balance: 0.0001g to 60 g ± 0.0001 g

Computer: PC with HDD, 3.5" drive, CD-ROM, TFT flat screen and keyboard

Color printer with automatic cut sheet feed, other options on request