Low carbon
Up to 0.1% C at 500mg sample resp. up to 0.5mg C¹⁾

Low sulfur
Up to 0.3% S at 500mg sample resp. up to 1.5mg S¹⁾

High carbon
Up to 5% C at 500mg sample resp. up to 25mg C ¹⁾
Indicating range Up to 100% C²⁾

High sulfur
30% S at 150mg sample resp. up to 45mg S¹⁾
Indicating range up to 100% S²⁾

Carbon
0.1 ppm C at 500mg sample resp. 0.05µg C

Sulfur
0.1 ppm S at 500mg sample resp. 0,05µg S ¹⁾

Low carbon ¹⁾
±1ppm C ³⁾ at 1gram sample resp. ±1 µg C or ±0.5% of carbon present

Low sulfur ¹⁾
±1ppm S at 1gram sample resp. ±1µg S or ±0.5% of sulfur present

High carbon ¹⁾
±100ppm C ³⁾ at 500 mg sample resp. ±50 µg C or ±0.5% of C present

High sulfur ¹⁾
±0.1% S at 150 mg sample resp. ±150 µg S or ±0.5% of S present

Normal sample weight
0.5g to 1g for steel and cast iron

Normal analysis time
40 to 50 seconds

Furnace type
Induction, 19.5 MHz 2.2 kVA max

Furnace dust cleaning
Automatic

Detection method
Solid state infrared absorption
for carbon and sulfur

Chemicals
CO₂ Trap Sodium hydroxide
H₂O trap Magnesium perchlorate
Catalyst copper oxide

Gas required
Oxygen 99.5% pure, 2 to 4 bar (30 to 60 psi), 3 l/min

Compressed air
4 to 6 bar (60 to 90 psi)

Interfaces
Computer - serial ⁴⁾

Power requirements
230 V AC ±10% 50/60 Hz max 15 Amps 3450 Watts

Weight
Analyzer: approx. 110 kg

Dimensions
 Width           Height              Depth   
    55cm(21")   80cm(31.5")    60cm(23.5")

Balance: 0.0001g to 60 g ±0.0001

Computer: Pentium PC with HDD, 3.5" drive, CD-ROM, color monitor and keyboard

Color printer with automatic cut sheet feed, other options on request